how to draw 3d sketch in catia

SpaceClaim Online Help

---

Importing and exporting

Use the Open control to open up files created in any supported format. Use the Save As control to export parts, assemblies, cartoon sheets, and 3D markups to formats read by other applications. Your license type determines which of these actions are supported.

If you work frequently with non- files, we recommend that you set your file options to optimize the importing and exporting process for your needs.

IDs for edges, faces, and bodies are now stored within the .scdoc  file. IDs are preserved when other files are opened or inserted into , and the IDs can also be exported. For example, if you export a design to an assay company, and they tag geometry with load positions, boundary conditions, and and then on, then when yous re-import that design, make changes, and re-export to the analysis visitor, they will not demand to recreate their tags on the new design.

If you lot import a file and it fails, the reason for the failure is reported in the Status Log on the lower right edge of the window.

To import a design

1. Select Open from the File menu or click in the Quick Access toolbar, or click the Insert tool in the Insert ribbon group on the tab.

   Depending on the selected file type, additional elements announced in the Open window. For descriptions of these options or to set their default values, click Options.

2. Select Check geometry to run the geometry check after the file is opened or imported. See Checking geometry.

3. Navigate to and select the file you lot desire to open up or insert.

   If yous are opening a file, information technology is displayed in a new . If you are inserting a file, it appears as an external component within the active design.

   If there is an invalid character in the path of a file y'all are trying to open or insert, that character is replaced with a valid character to avoid errors.

   If you open an Inventor, Pro/ENGINEER, or Unigraphics file that has missing components, you will be prompted to locate the missing files.

   Click End in the status bar to abolish an import while it is in progress.

   The proper name of the imported file is displayed in the Status Log when it is successful.

   Expand the sections below for information most a specific file format.

To consign a design or 3D markup

1. Select Save as from the File menu.

   Y'all can likewise press F12 or Ctrl+Shift+S.

   Your pattern must be saved every bit a certificate before you can consign it in another format.

2. Select a file blazon from the Save equally type drop-down.

3. Depending on the selected file type, additional options appear in the Save As window:

   • Salvage as copy if yous want to salve copies of external components referenced by the design with new names or replace external components with other external components. You lot must click Resources to do this.

   • References to display all the external components referenced by the file. Select one or more external components and click Browse to rename or replace the components.

   • Override Units is available when y'all consign some file types. Select the units from the listing.

   • Options to also set your default export options for the selected file type.

   • Amend information on export to clean up imprinted edges and divide curves when you export data.

   • Units Depends on file type

   • Cull a standard view

   • Version Depends on file type

   • Export office manufacturing information (JT)

   • Employ Perspective Camera for KeyShot

   • Store 3D information every bit: For PDF, cull either Geometry (PRC B-Rep) or Facets only (Universal 3D)

   • Catechumen components to Rhinoceros layers

   • Protocol: For files can be 203 or 214.

   • Image size (pixels): For Bitmap, GIF, JPEG, PNG, TIFF files opens Prototype Size dialog

   Subconscious lines are exported with the default line weight. Components maintain their mirror relationships when they are exported.

   For , , STL, and files, you lot tin select which version or protocol to save as. You lot can besides set your default export options past clicking Options.

   You lot tin save documents that only contain sketch curves to binary (.sab), text (.sat), , , IGES, , and VDA formats. You tin can import and consign free points for Rhino, PDF, , IGES, JT Open up, , and VDA formats.

   Imported designs with identical file names are given unique file names when you save your design. For case, if you imported proper noun.prt and name.asm, these files are saved as name.scdoc and name2.scdoc.

   Aggrandize the sections below for information nearly a specific file format.

4. Scan to a folder and type a file name in the dialog.

5. Click Salvage.

Import: Supported File Types

3D - parts, assemblies (versions upwards to 25)

.sat, .sab

• When you salve an SAT file to an X_T file, bad edges are cleaned up in the design.

• When y'all import files, the instance proper noun "role n (trunk one thousand)" is at present imported, but only if the trunk name is different from the office name. The component and body names are separated by a character which you can define in the options for files. For instance, the default character is a period, so the imported name would exist component.torso. This way, if in that location were one body named bicycle in i component, the name of the imported component in SC would be wheel. An instance is a re-create of a body (a copied or pattered solid).

• bodies can exist imported using the RealDWG option, Sketch curves and text can exist imported into Designs, 2D.

Facets, 3D - parts, assemblies, Geometry (China B-Rep)

.pdf

• 32-scrap and 64-bit platforms are supported.
• Colour information is imported for 3D PDFs.
• Supports B-REP import and consign
• Defaults to B-Rep when exporting
• Importing as graphical objects - non semantic - is supported.
  • Notes
  • Geometric Tolerances
  • Finishes
  • Symbols
  • Targets
• No Adobe Acrobat required for B-REP import and export, 32bit and 64bit platforms supported, Adobe Acrobat 10 Pro is not supported
• 3D PDF via a PRC neutral file along with Semantic (if data is nowadays)
• Curves are imported from faceted information.

3D - parts, assemblies

.amf

• Import as well supports compressed AMF.

• You can stop AMF import using the Stop button when image processing takes as well long.

• names and colors are supported.

R12 to 14, 2000, 2004, 2007, 2010, 2013

modelspace and layout space entities including solids ( V7 format)

Includes Polyface Meshes

.dwg, .dxf

• drawings tin can be inserted every bit layouts.

• If you import an file and you don't see the geometry you expect, try changing the import options. See File import and export options.

• When you salvage a blueprint with a shaded graphics style as a file, it is converted to the hidden line manner.

• When you save a sheet metal design as a file, notes and bend lines are saved on the aforementioned layer, and the overall unfold dimensions are removed.

• weights tin can be exported to ( or ). Hatch lines on drawing sheets are exported as stand-alone lines.

• You can import polyface meshes from files every bit 3D solids. See File import and export options for a list of polyface mesh import options.

• imports "Proxy entities" in and files when yous select the TeighaDWG option.

• If an file won't open up, try irresolute the pick to RealDWG. Some files contain embedded models; notwithstanding, these may not be standard models. The RealDWG libraries contain an API to save dorsum these variant models in the last common format, v7. The TeighaDWG libraries do non.

• bodies tin be imported using the RealDWG option, Polyface meshes import as lightweight (read-only), Sketch.

• Export as 2D snapshot
• Spaces are imported into separate windows.
• Empty Spaces are ignored on import.
• Spaces are only supported for Teigha, NOT RealDWG.

parts, assemblies (versions V4 four.1.9 to four.2.4)

assemblies (versions V5 R8 to R24, V6R2014)

.model, .CATPart, .CATProduct, .cgr, .exp

V6 .3DXML R2010x - R2013x

• faceted (.cgr) files can be opened, but appear as lightweight components that cannot be loaded. You can relieve imported .cgr files every bit documents that tin can be opened later; nonetheless, this document'due south content remains lightweight. Information technology is visible in the but you can't change the model.

• files with production manufacturing data () can be opened or inserted. Visibility is turned off. If a layer doesn't exist, information technology is created automatically.

• When exporting V5 files, you tin deselect the Simplify Data option. When importing or exporting files, the XYZ locations of signal objects calibration correctly.

• Includes Product Manufacturing Information () placed on the Imported Planes.

• V6 precise role and product information must be exported as V5CATPart and CATProduct to exist read into SpaceClaim.
• Import and export of free points is supported
• CGR imports Facets equally mesh objects. SpaceClaim recommends editing meshes on a 64bit Bone.

parts (assemblies are flattened)

.agdb

Upwardly to 16

IDF and PADS files (versions IDF three.0 and IDF 4.0)

.idf, emn, .idb

• Most content within IDF 4.0 files is supported.

• of panels and boards, cutouts, filled areas, go on-ins, materials, panels and everything related, sublayouts, and thermal models are non supported.

• Open IDF and PAD files

• IDF files can exist synchronized with the imported model.
  • Select any geometry in the model and utilise RMB > Update IDF to update the IDF file based on component operations performed in the model (eastward.k. moved components).
  • The electric current SpaceClaim certificate must have been created by importing an IDF file.
  • The source IDF file must be present on disk at its original location.
  • A new IDF file is written that contains the updated information.
  • The new file can be read dorsum into the originating ECAD organisation to update the components.

parts, assemblies (versions up to 5.3)

.igs, .iges

• Curves and Colors are supported on import.

parts (versions six – ten)

.ipt

parts, assemblies (versions 11 to 2015)

.ipt, .iam

• You can read the limitations here: http://doc.spatial.com/index.php/InterOp:Connect/Inventor/Inventor_Reader#Limitations.

• Limited support for Inventor assembly

  • attributes such as colors and layers are not supported.

  • Inventor parts and Inventor sub-assemblies should be nowadays in the main (root) of the Inventor directory.

  • level features are not supported. For example, an instance can be marked as suppressed (that is, non visible) in an Inventor assembly. Because the translator does non support reading suppressed information, suppressed instances are translated.

• Inventor surfaces not supported

  The translator currently does not handle "helical" surfaces in Inventor six files and "cylspl" surfaces in Inventor 7 files. If the Inventor file contains any of these surfaces, a partial translation takes place skipping the data for these surfaces and converting the remaining entities.

• Limited entity back up for Inventor 11, 2008, 2009, and 2010

  The translator currently does not back up some specific entities resulting from advanced feature Inventor operations such as Lofting.

• No back up for attributes

  The translator does not support translating attributes such every bit colors and layers.

• No support for subconscious flag

  The translator does not support filtering hidden bodies. Thus, all hidden bodies are translated likewise.

• Limited support for units

  The translator supports only millimeter and inch for Inventor 6 – xi and 2008. For versions 2009 and 2010, the translator supports only millimeter every bit unit of measurement. All unsupported units are assumed to be millimeter.

 parts, assemblies (versions 6.4, 7.0, viii.0, 8.i, eight.2, 9.0 to ix.5)

.jt

• JT Open v.3 libraries are available for reading and writing JT files that were created with version 5.3.
• JT files with product manufacturing information () are supported for:
  • datum labels
  • text notes
  • dimension measurements
  • GD&T
  • Weld symbols
  • Flagnotes
• selection is ON by default
• Semantic and Polyline are supported. Semantic imported dimensions will update with geometry changes. Polyline are just curves in space that do non update.
• Semantic is placed on Layer0 after import. Polyline is placed on a layer called Imported Polyline Annotations.
• For GD&T symbols, you can click whatever tolerance annotation or datum symbol to view its values in the .
• Click on an arrow or line to view or modify arrow or styles in the .
• Unicode file names are supported.
• Import and export of free points is supported
• JT Open V6.4 and V7.0 imported and exported as faceted data

parts, assemblies (versions NX1 through NX9 and UG v11 through xviii)

.prt

parts, assemblies (V10.0 through V26)

.x_t, .x_b, .xmt_txt, .xmt_bin

curves (insert only)

.txt

• A spline curve is created by default or if the option Polyline=False is used. If the option Polyline=True is used, then the points are connected past direct line segments.

• By default, 2D curves are created. When specifying 2D curves, the starting time cavalcade of the data points must be an integer and gives the height of the airplane of 1 of the curves. The beginning of a new bend is specified by changing this acme from one line to the next. If option 3D=True is used, the curves tin exist 3D

• Utilize the Fit keyword to specify whether Plumbing fixtures or Interpolation is used.

  Fit=True uses Fitting. Fitting creates a curve that "Fits" the data points using a specified tolerance. The curve may non laissez passer exactly through all points and the altitude from the curve to the indicate will be within the tolerance.

  Use the Fittol keyword when Fit=Trueto specify the Fitting tolerance in model units. For instance Fittol=1.0e-2

  The curve below uses Fitting (i.e. Fit=true). A large tolerance (fittol=ii.0) is used to exaggerate the fact that the curve does not pass through the points merely merely gets within the specified tolerance.

  

  Fit=Simulated uses Interpolation. Interpolation requires that the curve pass exactly through all of the points. An interpolation method is used to build a continuous curve through all of the points.

  The bend below is interpolated (i.east. Fit=False). There are seven points in the file and the curve passes exactly through each one.

  

• Multiple curves are separated by blank lines.

• You can import point curve text files that comprise single-point curves, which will exist created every bit points.

• -bend text files opened or inserted in display a closed bend when the file has a repeated value.

• Curves can be imported to coordinate systems or other geometry like other imported objects.

• -curve text files with columns separated by commas tin be opened or inserted in . This feature allows you lot to import any comma-separated value file into .

• If there is an error reading the input text file, a message will appear with the line number of the mistake in parentheses followed past the text appearing on that line.

• The post-obit example shows the contents of a point curve text file on the left and the 3D curves it creates on the right:

  • that the betoken coordinates are (Z, Ten, Y).

  • For case (one, 2, 3) is (Z=1, 10=2, Y=3).

3d=true polyline=fake ane 0 0 1 0 1 1 1 0 1 1 ane 2 0 1 2 i 0 iii 0 0 iii 0 one 3 1 0

Keywords:

• polyline=imitation - spline curves are created.
• polyline=truthful - straight lines are created.
• 3d=true - 3D curves are created.
• 3d=simulated - curves are two-dimensional. This is also the case if the selection is non set.
• fit=true - utilize Plumbing fixtures.
  • Fitting finds the "Best Fit" through the points.
  • Does non require the curve to laissez passer through all of the points
• fit=false - use Interpolation.
  • Interpolation forces the bend to pass through all the points in the file.
• fittol=one.0e-two - Plumbing fixtures tolerance in the units used in the file.

The blank line after the first prepare of coordinates indicates that the next set of coordinates is a new curve.

You can copy the file contents above and paste them into a text file, then utilize Insert File to try it yourself.

parts, assemblies versions 16 through Wildfire five.0(Creo one.0, ii.0)

.prt, .asm, .xpr, .xas

• When you import Pro/ENGINEER assemblies and parts are missing, you lot volition be prompted to search for the missing files.

• Wildfire five (Creo 1.0, 2.0) is non supported.

• Example and assembly accelerator files (*.xpr and *.xas) tin now be opened directly into .

• Mesh is automatically imported when there are no B-Rep contents in the Rhino file.

parts, assemblies (version 4.0, V5.0)

.3dm

• When importing a Rhino file, multi-segmented curves are consolidated.

• You can export layer names, color information, sketch lines, and material information.

• Neighboring topology is taken into consideration past default. This means that if issues are establish with a face up, and so its neighboring faces can provide information used to fix the face.

• The Rhinoceros 32/64-bit plug-in supports the Rhino V5 Beta version. Y'all can employ it to import and export using Rhinoceros V4 formatted information. As before, y'all can also cut and copy work in progress out of Rhino and MOI, and paste information technology into .

Supported Rhino	Rhino object	entity
Solids	Closed polysurfaces	trunk
	Closed surfaces: sphere, torus, ellipsoid dots;
Polysurfaces (open)		Sheet trunk
Surfaces	Trimmed surfaces	Sheet body
	Untrimmed surfaces with purlieus edges
Curves (bend, polycurve)		Named sketch curve
objects (indicate, signal deject)		Not supported
mesh objects		Not supported
name		proper noun
color		color
Layers	name	name
	colour	colour
	On/off layer	Evidence/hide layer
	Locked/unlocked layer	Locked/unlocked layer
	construction	construction
Materials	name	name
	Other material attributes	Non supported
		Not supported

 parts, assemblies V2015 SP0

 .rsdoc

 parts, assemblies up to SketchUp 8

.skp

parts, assemblies (V18 - ST6)

.par, psm, .asm

parts, assemblies (version 98 through 2014)

.sldprt, .sldasm

• If you open a SolidWorks file, searches for required associates and external part files in the following locations:

  • Root folder of the assembly

  • Equivalent subfolder in new root folder

  • Absolute path to the component saved in the assembly file

• When you import a design from SolidWorks, the units are changed to match the part.

parts, assemblies (version AP203, AP214 [geometry])

.stp, .pace

When you import assemblies from one file, select the Create multiple documents when importing assemblies file option if you desire the assemblies to remain in one file instead of existence dissever into multiple files, one for each internal component.

parts, assemblies Facets or Solids

.stl

• When exporting STL files, the output is set to Binary by default.

• STL files tin include polyface meshes, and they can exist imported as lightweight objects. Polyface meshes are imported as solids.

• When saving equally an ., the quality is based your graphics quality setting. We recommend setting the pick to enable the highest possible graphics quality if you lot desire your design to be useful every bit an rapid prototype for form, fit, and function purposes.

• You can import an as a solid, if it has multiple planar areas that tin exist merged into one planar face.

• Y'all can import an as a and consign information technology as another . This makes it possible to import multiple STL files into a document so export everything as a single .

parts, assemblies (version 1.0 and 2.0)

.vda

files (insert simply) with proper codec(s) required for all merely WMV and AVI

.wmv, .avi, .flv, .mkv, .mov, .mp4, .mpg, mpeg, .ogm, .vob

See Inserting a video

parts, assemblies (Facets)

.obj

Consign: Supported File Formats

Versions 6, 7 fifteen-25 (V25 default)

parts and assemblies (assemblies are flattened)

.sabbatum, .sab

• When you salve an SAT file to an X_T file, bad edges are cleaned up in the blueprint.

• When you lot import files, the instance proper name "part n (body grand)" is now imported, simply only if the body proper noun is different from the part name. The component and body names are separated past a graphic symbol which you can ascertain in the options for files. For example, the default grapheme is a period, so the imported proper name would be component.body. This mode, if at that place were one trunk named wheel in i component, the proper name of the imported component in SC would be cycle. An example is a re-create of a trunk (a copied or pattered solid).

• bodies tin be imported using the RealDWG option, Sketch curves and text tin can be imported into Designs, 2D.

• can exist written to Sat and SAB files.

Facets, Geometry (PRC B-Rep), curves

parts and assemblies

.pdf

• 32-bit and 64-scrap platforms are supported.
• Color information is exported for 3D PDFs.
• Supports B-Rep import and export
• Mesh-simply .scdoc's can be exported to PDF.
• No Adobe Acrobat required for B-Rep import and export, 32bit and 64bit platforms supported, Adobe Acrobat X Pro is not supported

2D Impress to or save drawings merely

.pdf

• 32-bit and 64-bit platforms are supported.

V1.0

3D - parts, assemblies

.amf

• Consign also supports compressed AMF

• The following are supported for export:

  • Geometry

  • and face colors

  • fabric

  • Textures

  • Lightweight components

  • structure tree

• Consign is supported by the Converter.

R12 to 14, 2000, 2004, 2007, 2010, 2013

solids

.dwg, .dxf

• drawings tin can exist inserted as layouts.

• If you import an file and you don't come across the geometry you lot expect, endeavour changing the import options. Come across File import and export options.

• When you save a design with a shaded graphics manner equally a file, it is converted to the hidden line style.

• When you salvage a sheet metal design as a file, notes and bend lines are saved on the same layer, and the overall unfold dimensions are removed.

• weights can be exported to ( or ). Hatch lines on drawing sheets are exported as stand-lonely lines.

• You lot can import polyface meshes from files as 3D solids. Meet File import and export options for a list of polyface mesh import options.

• imports "Proxy entities" in and files when you select the TeighaDWG option.

• If an file won't open, try changing the option to RealDWG. Some files contain embedded models; however, these may not be standard models. The RealDWG libraries contain an API to save back these variant models in the concluding mutual format, v7. The TeighaDWG libraries do not.

• bodies tin exist imported using the RealDWG pick, Polyface meshes import as lightweight (read-only), Sketch

• Consign as 2D snapshot

V5/V6 R6 to R25 (R24 default)

parts, assemblies

.CATPart, .CATProduct,

• faceted (.cgr) files can be opened, only appear as lightweight components that cannot be loaded. You can save imported .cgr files as documents that can be opened later on; notwithstanding, this certificate'south content remains lightweight. It is visible in the but you can't modify the model.

• files with product manufacturing information () can be opened or inserted. Visibility is turned off. If a layer doesn't exist, information technology is created automatically.

• When exporting V5 files, y'all can deselect the Simplify Data option. When importing or exporting files, the XYZ locations of point objects scale correctly.

• Includes Product Manufacturing Information () placed on the Imported Planes

• V6 precise part and product data must exist exported ass V5CATPart and CATProduct to be read into SpaceClaim

MS Office 2003, 2007, 2013

.xls, .xlsx

• If MS Role is installed

parts, assemblies (version 5.3, JAMA-IS, Types: 186, 144, 143)

.igs, .iges

parts, assemblies, drawing sheets, slides (export as second snapshot)

.bmp, .gif, .jpg, .png, .tif

On export, you tin can specify the image size in pixels or per centum of full size.

When saving a drawing as an image you can specify Apply Scene extents or Use Sheet extents. Scene extents includes grey borders around the cartoon to fill the size of the entire scene. Canvas extents simply includes what is within the sheet boundary.

See Inserting an image

parts, assemblies V6.4, 7.0, eight.0, 8.ane, 8.two, 9.0 to 9.five

.jt

• JT Open 5.iii libraries are available for reading and writing JT files that were created with version 5.3.
• JT files with product manufacturing information () are supported for:
  • datum labels
  • text notes
  • dimension measurements
  • GD&T
  • Weld symbols
  • Flagnotes
• option is ON by default
• Semantic and Polyline are supported. Semantic imported dimensions volition update with geometry changes. Polyline are simply curves in space that do non update.
• Semantic is placed on Layer0 after import. Polyline is placed on a layer called Imported Polyline Annotations.
• For GD&T symbols, you tin can click any tolerance annotation or datum symbol to view its values in the .
• Click on an pointer or line to view or change arrow or styles in the .
• Unicode file names are supported.
• Semantic GD&T created in is exported to JT.
• Export and import of free points is supported
• JT Open V6.four and V7.0 imported and exported as faceted data

parts, assemblies V12 through 26 (V26 default)

.x_t, .x_b

3.6

parts, assemblies

Mesh-only .scdoc's can be exported to POV file format

MS Function 2003, 2007, 2013

slides .ppt

V4.0, V5.0

parts, assemblies

.3dm

• When importing a Rhinoceros file, multi-segmented curves are consolidated.

• You can consign layer names, color data, sketch lines, and material data.

• Neighboring topology is taken into consideration by default. This means that if problems are found with a confront, and so its neighboring faces can provide information used to fix the face.

• The Rhino 32/64-fleck plug-in supports the Rhino V5 Beta version. You can utilise it to import and export using Rhino V4 formatted information. As earlier, you tin also cut and re-create work in progress out of Rhino and MOI, and paste it into .

• The SpaceClaim plugin for Rhino is but supported for Rhino V5.0.

Supported Rhino	Rhinoceros object	entity
Solids	Closed polysurfaces	body
	Closed surfaces: sphere, torus, ellipsoid dots;
Polysurfaces (open)		Canvas body
Surfaces	Trimmed surfaces	Sheet body
	Untrimmed surfaces with purlieus edges
Curves (curve, polycurve)		Named sketch curve
objects (betoken, bespeak deject)		Not supported
mesh objects		Not supported
proper noun		name
color		color
Layers	name	proper name
	colour	colour
	On/off layer	Show/hide layer
	Locked/unlocked layer	Locked/unlocked layer
	structure	structure
Materials	proper name	name
	Other material attributes	Non supported
		Not supported

parts, assemblies SketchUp V3.0 to V8.0

.skp

AP203, AP214 (geometry)

parts, assemblies

.stp, .step

When you import assemblies from one file, select the Create multiple documents when importing assemblies file option if you lot desire the assemblies to remain in one file instead of being dissever into multiple files, one for each internal component.

parts, assemblies

.stl

• When exporting STL files, the output is prepare to Binary by default.

• STL files tin can include polyface meshes, and they tin can be imported as lightweight objects. Polyface meshes are imported every bit solids.

• When saving every bit an ., the quality is based your graphics quality setting. We recommend setting the option to enable the highest possible graphics quality if y'all want your design to be useful as an rapid prototype for form, fit, and function purposes.

• Y'all tin import an as a solid, if it has multiple planar areas that can be merged into ane planar face up.

• Y'all can import an equally a and consign it equally another . This makes it possible to import multiple STL files into a document and and so consign everything as a single .

• STL consign can be performed directly from lightweight (visualization simply) .scdoc

parts, assemblies

.obj

• Structure is not maintained when you relieve as an OBJ file.

• When you salvage your design as an OBJ file, the current graphics tessellation is used for accuracy. You can modify the tessellation past setting the Image quality vs. graphics speed option.

• UV'south are transformed according to a trunk or confront and texture information is exported with the file.

role and assembly solids only

.xaml

The orientation and translation of the current view is saved in an XAML file.

To import a design by dragging and dropping

Drag the file icon to anywhere in the championship bar and ribbon area. You can also drag the icon into the design window if no blueprint tab is open.

This volition open up the design and all of its drawing sheets, annotations, etc.

You tin can besides cut and paste information from certain applications. Run across Copying and pasting from other applications.

To consign a design equally an image

1. Select Save every bit from the File menu.

   You can also printing F12 or Ctrl+Shift+S.

   Your pattern must exist saved every bit a document before you can consign it in some other format.

2. Select an image file type (GIF, JPG, PNG, or TIFF) from the Salvage as type listing.

3. (Optional) Click Image size to alter the size of the prototype.

4. Browse to a folder and blazon a file name in the dialog.

5. Click Save.

To copy the contents of the Design window to Windows clipboard

Correct-click in the and select Copy Scene to copy an image of the contents of the to the Windows clipboard. Yous tin can then paste the image into a document.

To open a the parent certificate of a design

Right-click the top level component in the and select Open up root part to open the parent certificate of a pattern that was saved later on its parent was closed. This problem may exist in files that were created with previous versions of .

Examples

data from a file

Consolidated multi-segmented curves from a Rhino file

---

© Copyright 2022 SpaceClaim Corporation. All rights reserved.

perryscred1955.blogspot.com

Source: http://help.spaceclaim.com/2015.0.0/en/Content/Importing_and_exporting.htm

Share this post